Skip to main content

Application Settings ImageFloat_Right

After a successful registration, clicking the button in the top right corner of the main application menu will lead the user to the Settings menu.

Within the Settings menu, it's possible to:

Clicking on the button in the top right corner of the main application menu will open the Biometry Settings.

Each configurable setting is described in more detail in the chapters below.








Biometry Settings

ImageFloat_Right

Biometric Authorization can be activated to be required at the start of the application. Only possible if biometric authorization is already in use for the device (takes the device biometrics).

To enable, click the button next to the Active Biometric Authorization.

After enabling the biometric authorization it is possible to more granularly define which operations require the biometric authorization.



Biometric Security Details
Biometric Security OptionsDescription
Startup Biometry ScreenWith active biometric authorization set to enabled it is required to authenticate at the startup of the application. This operation cannot be disabled without disabling Active Biometric Authorization.
Activate Lock ScreenImageFloat_Right Clicking on the setting will open a selection box with multiple choices. Please choose the time after which you would like the application to require login with the biometry authentication again.
Confirm Approval or Denial of a TaskWhen enabled, biometric authorization is required when approving or cancling either an operational or key management approval task.
Confirm Show Public Key or CertificateWhen enabled, biometric authorization is required when clicking on the button to show the Public Key or Certificate of the registered approver.

Details Level Setting

ImageFloat_Right

This setting defines the level of which the DETAILS Tab shows when opening an approval task menu. For more information on the Details Tab , please see Tutorials - 1. Authorization App.

ImageFloat_Right By clicking on the Details Level Setting a window will open to specify a setting for the details level.

  • To configure a details level setting simply click on the desired setting and click OK to confirm. This will close the window and begin a task fetching process.
  • Clicking anywhere outside the details level window or on the Cancel button will cancel the setting configuration.


Details Level Description
Details LevelDescription
StandardThis is the default option. It will only show the details such as the payload, payloadType, signKeyName, signatureAlgorithm and the signatureType.
With Key AttributesWith this setting is enabled a button will be added to the key details in the DETAILS Tab of the approval task menu. Clicking the button will show the Key Attributes in xml format. All other shown details about the task will remain the same as with Standard level.
NOTE: This setting can slow down the task fetching process.

Approver Information

ImageFloat_Right

Within the Settings menu the registered Approver information can be found.









Approver Information Description
Approver InformationDescription
Approver NameShows the name of the registered Approver. Can only be changed by going through the New Registration procedure..
API AddressURL link to the Transaction Security Broker the application is connecting to. Can only be changed by going through the New Registration procedure.
API KEYOptional API Key required for access to a specific Approval REST API endpoint. See Transaction Security Broker
Public KeyShows the Public Key of the registered approver. Tied to the Approver and is only changed when registering a new Approver. See New Registration for more information.
1. To show the Public key press the button.
2. If biometric authorization is required to show the public key, authorize yourself.
3. The public key is shown.
4. Optionally you can copy the public key to clipboard by pressing the button COPY TO CLIPBOARD.
CertificateShows the Certificate of the registered approver. Tied to the Approver and is only changed when registering a new Approver. See New Registration for more information.
1. To show the certificate press the button.
2. If biometric authorization is required to show the certificate, authorize yourself.
3. The certificate is shown.
4. Optionally you can copy the certificate to clipboard by pressing the button below COPY TO CLIPBOARD

New Registration

In cases when certain settings have to be changed or when a new Approver must be registered the New Registration procedure can be used.

warning

Pressing the button will immediately lead you to the new onboarding/registration procedure. It is possible to cancel the procedure by exiting and closing the application or by clicking the "back button" on your android device.

  1. To Register a new Approver click on the Button.
  2. This will lead the user to the same registration screen required at the application setup.